Allied Telesis AT-S94 - Manual (Page 31)

Configuring Internet Protocol Version 6
Page 31
The IPv6 Neighbors Page contains the following fields:
View IPV6 Neighbors
•
View Static — Displays the static IPv6 address entries from the IPv6 Neighbor Table.
• View Dynamic — Displays the dynamic IPv6 address entries from the IPv6 Neighbor Table.
• View IPv6 Address — Displays the currently configured neighbor IPv6 address entries from the IPv6
Neighbor Table. The address must be a valid IPv6 address, specified in hexadecimal using 16-bit values
between colons.
• View MAC Address — Displays the MAC address mapped to the IPv6 address.
IPV6 Neighbors
•
Clear Table — Deletes the entries in the IPv6 Neighbor Table. The possible field values are:
– Static Only — Deletes the static IPv6 address entries from the IPv6 Neighbor Table.
– Dynamic Only — Deletes the dynamic IPv6 address entries from the IPv6 Neighbor Table.
– All Dynamic and Static — Deletes the IPv6 Neighbor Table static and dynamic address entries.
• The radio button is selected to delete/add/modify an entry.
• Interface — Displays the interface (VLAN) on which the IPv6 interface is configured.
• IPv6 Address — Defines the currently configured neighbor IPv6 address. The address must be a valid IPv6
address, specified in hexadecimal using 16-bit values between colons.
• MAC Address — Displays the MAC address mapped to the IPv6 address.
• Type — Displays the type of the neighbor discovery cache information entry. The possible field values are:
– Static — Shows static neighbor discovery cache entries.
– Dynamic — Shows dynamic neighbor discovery cache entries.
• State — Displays the IPv6 Neighbor status. The following states are available: Incomplete, Reachable, Stale,
Delay and Probe.
2. Select an interface.