Show ports security – Allied Telesis AT-S95 CLI User Manual
Page 61
Address Table Commands
Page 49
show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
Forward-Unregistered
Forward-All
Static
Status
Static
Status
----
---------
---------
---------
----------
1/g1
Forbidden
Filter
Forbidden
Filter
1/g2
Forward
Forward(s)
Forward
Forward(s)
1/g3
-
Forward(d)
-
Forward(d)
Console# show ports security
Port Status
Learning
Action
Maximum
Trap
Frequency
----
-------
--------
-------
-------
-------
---------
1/g1
Locked
Dynamic
Discard
3
Enable 100