Allied Telesis AlliedView-EMS 3.11 AMIGO - Manual (Page 10)

AlliedView™-EMS 3.11 AMIGO USERS GUIDE Page 10 of 43
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel authPriv -AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authPriv -AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.11 Privacy Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authPriv, then
you must specify a Privacy Password that is configured for the User Account Name on the
target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel authPriv -AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authPriv -AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.12 Configuration File
The configuration file is created by selecting File > Save As. It contains the environment
settings for AMIGO.
Example:
Amigo test.amg
2.1.13 Parameter File
Parameters can be written in a file. You can specify the file from which AMIGO is to read
the parameters. The parameter file is a plain text file which contains a name-value pair in
each line.