Allied Telesis AlliedView-EMS 3.11 AMIGO - Manual (Page 6)

AlliedView™-EMS 3.11 AMIGO USERS GUIDE Page 6 of 43
2.1 Starting From the Command Line
The command line interface is the most basic way to start AMIGO.
Topics:
• Command Syntax
• Target Host
• SNMP Version
• Get Community
• Set Community
• User Account Name
• Security Level
• Authentication Protocol
• Authentication Password
• Privacy Protocol
• Privacy Password
• Configuration File
• Parameter File
2.1.1 Command Syntax
To start AMIGO from the command line, use the following syntax.
Amigo [options]
You can specify the following options.
TargetHost
The IP address or hostname of the target host.
SnmpVersion
SNMP version to be used.
GetCommunity
SNMP Get community string. This is used to retrieve MIB values.
SetCommunity
SNMP Set community string. This is used to modify MIB values.
UserName
User account name to be used for accessing the MIB. This is required when using
SNMPv3.