Allied Telesis AT-MCF2000M - Manual (Page 19)

AT-MCF2000M Management Module Installation Guide
19
Here are some of the management functions you can
perform with the module and the AT-S97 Management
Software:
ˆ Configure the operating parameters of the twisted pair
ports in the media converter channels:
– Auto-Negotiation
– Speed
– Duplex mode
– MDI/MDI-X configuration
ˆ Set the duplex mode of the fiber optic ports.
ˆ Select the operating mode of a media converter
channel:
– MissingLink
™
– Smart MissingLink
– Link Test
ˆ Establish rate limits for the ingress and egress packets
on the ports of the media converter channels.
ˆ Reset media converter modules.
ˆ View event messages.
ˆ Send event messages to a syslog server.
ˆ Manage up to sixty-four media converter modules from
one management module.
ˆ Create additional manager accounts.
ˆ Download new versions of the management software to
the management and media converter modules.
Note
For a complete list of the management features, refer
to the AT-S85 and AT-S97 Management Software
Command Line User’s Guide, available from the Allied
Telesis web site.