Allied Telesis AT-S63 - Manual (Page 423)

AT-S63 Management Software Features Guide
Section IX: Management Security 423
SSH Server
When the SSH server is enabled, connections from SSH clients are
accepted. When the SSH server is disabled, connections from SSH clients
are rejected by the switch. Within the switch, the AT-S63 Management
Software uses well-known port 22 as the SSH default port.
Note
If your switch is in a network that is protected by a firewall, you may
need to configure the firewall to permit SSH connections.
The SSH server accepts connections from configured users only.
Acceptable users are those with a Manager or Operator login as well as
users configured with the RADIUS and TACACS+ protocols. You can add,
delete, and modify users with the RADIUS and TACACS+ feature.
SSH encryption key management is implemented by the Encryption
(ENCO) protocol. For information on how to create encryption keys, see
Chapter 34, “Encryption Keys” on page 393.