Allied Telesis AT-S97 - Manual (Page 146)

Chapter 9: Configuration File Commands
146
Log Configuration
This section controls the event log and the syslog client.
Figure 26. Log Configuration Section
The section accepts the following commands:
ˆ “LOGGING DISABLE EVENTLOG” on page 123
ˆ “LOGGING DISABLE SYSLOG” on page 124
ˆ “LOGGING ENABLE EVENTLOG” on page 125
ˆ “LOGGING ENABLE SYSLOG” on page 126
ˆ “LOGGING SET EVENTLOG” on page 127
ˆ “LOGGING SET SYSLOG” on page 129
NTP Configuration
This section controls the NTP client for setting the modules date and time
from an NTP server on your network or the Internet.
Figure 27. NTP Configuration Section
This section accepts the following commands:
ˆ “NTP DISABLE” on page 114
ˆ “NTP ENABLE” on page 115
ˆ “NTP SET” on page 116
### Log Configuration
logging enable eventLog
logging enable sysLog
logging set sysLog host=0.0.0.0
logging set sysLog facility-code=1
logging set eventLog severity-level=event
### Ntp Configuration
ntp set server=0.0.0.0
ntp disable