Allied Telesis AT-S97 - Manual (Page 61)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
61
SYSTEM SET HOSTNAME
Syntax
system set hostname= name
Parameter
hostname Specifies a name of up to 25 alphanumeric characters for
the stack. The host name is also used as the command line
prompt. Spaces are permitted, but a host name with spaces
must be enclosed in double quotes (“ “). To remove the
current value without specifying a new value, enter “none.”
Privilege Levels
Administrator and read-write.
Description
This command assigns a name to a stack. The name is displayed at the
top of the console screen during a command line management session.
The first fourteen characters of the host name are also used as the
command line prompt in the management interface. To view the current
value for this parameter, examine the top of the console screen or the
command line prompt. Alternatively, use the SYSTEM SHOW INFO
command, explained in “SYSTEM SHOW INFO” on page 66. To assign
individual names to the chassis in a stack, refer to the SYSTEM SET
CHASSIS command.
Examples
This command sets a stack’s name to “MCF2000 12a traffic:”
system set hostname="MCF2000 12a traffic"
This command removes a stack’s name without assigning a new value:
system set hostname=none