Allied Telesis AT-S63 User Manual
Page 308
Advertising
Chapter 27: Internet Protocol Version 4 Packet Routing
308
Section VII: Routing
destination. The range for the preference parameter is 0 to 65535. The
lower the value, the higher the preference. The default value for a static
route is 60.
The commands for managing static routes are ADD IP ROUTE, DELETE
IP ROUTE, and SET IP ROUTE.
Note
The command line interface is the only management interface in the
AT-S63 Management Software that supports static routes. Static
routes are not supported from the menus and web browser
interfaces.
Advertising