Viewing the error groups – Allied Telesis AT-S88 User Manual
Page 139
Advertising
AT-S88 Management Software User’s Guide
131
Viewing the Error Groups
The error groups chart allows you to view a pre-defined group of errors for
the ports you choose.
To view the error groups, perform the following procedure:
1. From the main menu, select Statistics Chart > Error Group.
The Error Groups Chart page is shown in Figure 42.
Figure 42. Error Group Chart Page
2. In the Port list, select a port whose statistics you want to view.
3. In the Auto Refresh list, choose the number of seconds the switch
waits before polling for statistics: 5, 10, 15, or 30 seconds.
4. In the Color list, select a color for that port.
5. Click Draw.
Advertising