Allied Telesis AT-S62 - Manual (Page 360)

Chapter 21: Power Over Ethernet Commands
360 Section II: Advanced Operations
DISABLE POE PORT
Syntax
disable poe port= port
Parameters
port Specifies a port. You can specify more than one port at
a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command disables PoE on a port. The default setting for PoE on a
port is enabled. The port continues to provide standard Ethernet
connectivity even when PoE is disabled.
Examples
This command disables PoE on port 5 and 7:
disable poe port=5,7