Purge garp – Allied Telesis AT-S62 User Manual
Page 522
Advertising
Chapter 28: GARP VLAN Registration Protocol Commands
522
Section V: Virtual LANs
PURGE GARP
Syntax
purge garp=gvrp
Parameter
garp
Specifies the GARP application you want to reset.
The only GARP application supported by AT-S62
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command disables GVRP and returns all GVRP parameters to their
default settings. All GVRP-related statistics counters are returned to zero.
Example
The following command disables GVRP and returns all GVRP parameters
to their default values:
purge garp=gvrp
Advertising