Allied Telesis AT-WA7400/NA - Manual (Page 245)

AT-WA7400 Management Software User’s Guide
245
Configuring WPA/WPA2 Personal (PSK) Security on a Client
Wi-Fi Protected Access (WPA) with Pre-Shared Key (PSK) is a Wi-Fi
Alliance subset of IEEE 802.11i, which includes Temporal Key Integrity
Protocol (TKIP), Advanced Encryption Algorithm (
AES ), and Counter
mode/CBC-MAC Protocol (CCMP) mechanisms. PSK employs a pre-
shared key for an initial check of client credentials.
To configure WPA/WPA2 security on a client, perform the following
procedure:
1. Verify that you configured the AT-WA7400 Wireless Access Point to
use WPA/WPA2 Personal (PSK) security mode, as shown Figure 19.
Figure 19. Security Settings Page