Allied Telesis AT-WA7400/NA - Manual (Page 316)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
316
Set the cipher suite you want to use. The options are shown in Table 17.
The following example sets the cipher suite to Both :
AT-WA7400# set bss wlan0bssInternal wpa-cipher-tkip on
AT-WA7400# set bss wlan0bssInternal wpa-cipher-ccmp on
4. Set the Pre-shared Key
The Pre-shared Key is the shared secret key for WPA-PSK. Enter a string
of at least 8 characters to a maximum of 63 characters. Following are two
examples; the first sets the key to “
SeCret! ”, the second sets the key to
“ KeepSecret .”
Ex 1. AT-WA7400# set interface wlan0 wpa-personal-key "SeCret !"
or
Ex 2. AT-WA7400# set interface wlan0 wpa-personal-key KeepSecret
Note
Shared secret keys can include spaces and special characters if the
key is placed inside quotation marks as in the first example above. If
the key is a string of characters with no spaces or special characters
in it, the quotation marks are not necessary as in the second
example above.
Table 17. Cipher Commands
Function Commands
TKIP: Temporal Key Integrity
Protocol (TKIP), which is the
default. set bss wlan0bssIngernal wpa-cipher-tkip on
set bss wlan0bssIngernal wpa-cipher-ccmp off
CCMP (AES): Counter mode/
CBC-MAC protocol (CCMP) is
an encryption method for IEEE
802.11i. that uses the
Advanced Encryption
Algorithm (AES). set bss wlan0bssIngernal wpa-cipher-tkip off
set bss wlan0bssIngernal wpa2-cipher-ccmp on
Both: When the authentication
algorithm is set to Both, both
TKIP and AES clients can
associate with the access
point. WPA clients must have
either a valid TKIP key or a
valid CCMP (AES) key to be
able to associate with the
access point. set bss wlan0bssIngernal wpa-cipher-tkip on
set bss wlan0bssIngernal wpa2-cipher-ccmp on