Allied Telesis AT-WA7400/EU - Manual (Page 244)

Appendix B: Configuring Security on Wireless Clients
244
9. Click Properties to open the Smart Card or other Certificate
Properties dialog and enable the “Validate server certificate” option, as
shown in Figure 18.
Validate Server Certificate
Enable this option (click to check the box).
Certificates
In the certificate list shown, select the certificate for this client.
Figure 18. Smart Card or other Certificate Properties Dialog Box
10. Click OK in all dialog boxes to close and save your changes.
11. To complete the client configuration you must now obtain a certificate
from the RADIUS server and install it on this client. For information on
how to do this see “Obtaining a TLS-EAP Certificate for a Client” on
page 253.
WPA clients should now be able to connect to the access point using
their TLS certificates. The certificate you installed is used when you
connect, so you will not be prompted for login information. The
certificate is automatically sent to the RADIUS server for
authentication and authorization.
Enable (click to check)
Validate server certificate
3
Select (check) the name of certificate
on this client (downloaded from
RADIUS server in a prerequisite procedure)