Allied Telesis AT-WA7400/EU - Manual (Page 332)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
332
The following command adds “ 48 ” as a basic rate to wlan0 (the internal,
wireless interface):
AT-WA7400# add basic-rate wlan0 rate 48
To get the basic rates currently configured for this access point:
AT-WA7400# get basic-rate
name rate
-----------
wlan0 11
wlan0 5.5
wlan0 2
wlan0 1
wlan1 24
wlan1 12
wlan1 6
wlan0 48
The following command adds “ 9 ” as a supported rate to wlan0 (the internal,
wireless interface):
AT-WA7400# add supported-rate wlan0 rate 9
To get the supported rates currently configured for this access point (using
wlan0 as the interface for this example):
AT-WA7400# get supported-rate wlan0
rate
----
Add supported rate add supported-rate
WirelessInterfaceName rate
SomeRate
For example:
add supported-rate wlan0 rate 9
Get current supported
rates get supported-rate wlan0
Table 28. Rate Set Commands (Continued)
Function Command