Allied Telesis AT-2746FX - Manual (Page 68)

Chapter 3: Microsoft Windows 2000, 2003, and XP
68
Creating a Driver Installation Disk
This procedure creates a driver installation diskette. You can use the
diskette to run the AT-Setup utility on those systems that do not have a CD
drive.
To create a driver installation disk, perform the following procedure on a
system that has both a CD drive and floppy drive:
1. Make sure your system is turned ON and the Windows operating
system is running.
2. Insert the Allied Telesyn Installation CD into the CD drive.
The Installation CD main window is shown in Figure 24. If this window
does not appear, double-click on the My Computer icon, then double-
click on the Allied Telesyn Installation CD icon.
Figure 24. Allied Telesyn Installation CD Main Window