Features – Allied Telesis AT-WA7500 User Manual
Page 14
1 - Getting Started
14
Wireless end devices may use power management to maintain battery
life. These end devices periodically wake up to receive frames that
arrived while their radio was powered down. The access point
automatically provides a pending message delivery service that holds
frames until the end device is ready to receive them.
Features
The AT-WA7500 has the following features:
Point-to-Point Bridge (Wireless Bridge)
Wireless Access Point (WAP) or Repeater
Secure Wireless Hops (SWAP)
Secure Wireless Hops (TLS or TTLS)
802.11b, 802.11a Radios
Dual Radio Support
Wi-Fi Compliant
802.1x Authenticator
802.1x Authentication Server
Access Control List (ACL) Server
Password Server
Secure Web Browser Interface (HTTPS)
10Base-T/100Base-TX
Serial Port
Data Link Tunneling
IP Tunneling
Antenna Diversity
Non-incentive Antenna System
Power Over Ethernet