Allied Telesis AT-WA7500 - Manual (Page 99)

AT-WA7500 User’s Guide
99
The network name is case sensitive and can be no more than 32
alphanumeric characters.
Frequency (Master radio only)
Choose the frequency within the 5.15 to 5.35 GHz range that this
access point uses to transmit and receive frames. You can also set
the frequency to Dynamic, which lets the access point choose the
best available channel to use.
The available frequencies depend on the country and the radio
option configured on the access point. See the Worldwide
Frequencies for the 802.11a Radio table on page 94. If the radio is
a mid range radio, you can only choose 52, 56, 60, or 64.
You may want to use a single frequency to isolate the installation
to part of the band; for example, use a single frequency if other
wireless networks or microwave ovens are in the area.
3. Configure the advanced parameters for the radio. For help,
Configuring 802.11a Radio Advanced Parameters on page 101.
4. (Master only) Configure inbound filters. For help, see Configuring
802.11a Radio Inbound Filters on page 103.
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then
select Save Changes and Reboot. For help, see Saving
Configuration Changes on page 41.
6. (Optional) Configure security by selecting Configure security settings
for this radio. For help, see Chapter 6, Configuring Security on page
145.