Allied Telesis AT-WL2411 - Manual (Page 117)

AT-WL2411 Installation and User’s Guide
117
1. Click Wireless Bridging. The Wireless Bridging screen appears, as
shown in Figure 50.
Figure 50 Wireless Bridging Screen - Station
2. Click the down arrow on the right side of the Node Type field and
choose Station. Wireless hops are automatically disabled.
3. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.