Allied Telesis AT-S29 - Manual (Page 131)

131
The download file should be an AT-8324SX binary file from
Allied Telesyn; otherwise the agent will not accept it. The file
naming convention is:
Runtime program: AT-S29.BIN
POST program: Boot-Vx.yx, and
Mainboard program: 8051 -Vx.yz
4. After the file has been downloaded, the console screen will
display information similar to that shown below. Press "s" to start
the management interface, change the baud rate back to 9600,
and press Enter. The Logon screen will then appear
For details on managing the switch, refer to Chapter 2 for
information on the out-of-band console interface, or Chapter
3 for information on the Web interface.
XModem Download to DRAM buffer area DxOO200000:.. SUCCESS !
Verifying image in DRAM download buffer 0xOO200000... SUCCESS
Update FlashROM Image at OxO2880000... SUCCESS !
(D)ownload another Image or (S)tart Application: [SI s
Change Baud Rate to 9600 and Press <ENTER>.