Allied Telesis AT-S29 - Manual (Page 36)

Using the System Configuration Program
36
Configuring IP Trap Managers
The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap
management access.
Status Sets administrative status of entry to
enabled or disabled.
SNMP Configuration: IP Trap Managers
=====================
IP Address Community Name Status
1. 149.35.19.20 public DISABLED
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select.
<Space> to scroll options.