Viewing static mac addresses only – Allied Telesis AT-S25 User Manual
Page 151
AT-S25 Management Software User’s Guide
151
Viewing Static
MAC Addresses
Only
To display only static MAC addresses, perform the following procedure:
1. From the Main Menu, type 6 to select MAC Menu.
2. From the MAC Menu, type 2 to select Show all static MAC addresses.
A window is displayed with all the MAC addresses. An example of
the Show all MAC addresses window is displayed in Figure 58.
Figure 58 Show all static MAC addresses Window
This window is exactly the same as the Show all static MAC
address window, except for the title and the fact that it displays
only static MAC addresses. For information displayed in this
window, refer to the Table 11 in Viewing All MAC Addresses on
page 149.
Note
The MAC address of Module 1/Master switch will always be
displayed as a static MAC address on Port 00.