Allied Telesis AT-S25 - Manual (Page 211)

AT-S25 Management Software User’s Guide
211
If you select Port Status, the Port Status window in Figure 84 is
displayed.
Figure 84 Port Status Window
The information in this window is for viewing purposes only. To
adjust port parameters, refer to Configuring Port Parameters on
page 207.
Table 20 lists the parameters appeared in the Port Status window.
Table 20 Port Status Parameters
PARAMETER DESCRIPTION
PortName/
UplinkType PortName is the name of the port, and UplinkType is
the type of the applique’ in the uplink slot (AT-A14,
AT-A15, AT-A17, AT-A18, or AT-A19).
NOTE: The UplinkType only applies to the uplink
ports.
State The current state of the port.
Possible settings for this parameter are:
• Enable (default)
• Disable