Allied Telesis AT-8203 - Manual (Page 10)

Verifying Your Uplink Package
4
Verifying Your Uplink Package
Your uplink card package consists of:
❑ This installation guide
❑ One of the following cards:
— 155 Mbps ATM uplink OC-3 MMF card (model AT-8202), or
— FDDI uplink card (model AT-8203)
❑ One accelerator card
❑ Warranty card
If any of these components are damaged, contact your shipping carrier
representative. If any components are missing, please phone the Allied
Telesyn. Refer to Appendix D, “Where To Find Us,” on page 23.
Prerequisites for Card Installation
Before installing the uplink and accelerator cards, make sure you have the
following:
❑ An installed FORMULA 8200 switch and that it is functioning
properly
❑ Firmware version 1.4.3 or greater to support the uplink and
accelerator cards
If your switch does not have the latest firmware, download it from Allied
Telesyn’s FTP server. See Appendix D, “Where To Find Us” on page 23, for
information on how to access the server.