Allied Telesis AT-S25 - Manual (Page 138)

Section II: Local and Telnet Mangement
138
7. Enter the VID of the VLAN you wish to modify. Press the Enter key.
The Modify VLAN window for the selected VLAN is displayed. This
window contains all relevant information about the VLAN.
8. Change the VLAN’s information as desired.
The menu selections in the window are described in the table in
Creating a Port-based or Tagged VLAN on page 130.
9. Type U to select Update VLAN.
The VLAN has been modified.
10. Repeat this procedure starting with Step 4 to modify other VLANs.