Clearing port statistics – Allied Telesis AT-S25 User Manual
Page 179
AT-S25 Management Software User’s Guide
179
Clearing Port Statistics
To clear Ethernet port statistics, perform the following procedure:
1. From the Main Menu, type 7 to select Ethernet Statistics.
2. From the Ethernet Statistics menu, type M if you wish to select a
module other than the one currently displayed.
The prompt message is displayed:
Select Module ID: [1 to 8] ->
3. Enter the ID of the module you wish to select, and press the Enter key.
4. From the Ethernet Statistics menu, type 4 to select Clear Port Statistics.
The following prompt is displayed:
Enter Port List ->
5. Enter the port you wish to clear its statistics.
Once you the port number is entered, the following prompt is
displayed:
Ethernet statistics successfully cleared for
selected ports
6. Press any key to continue.