Allied Telesis FastPrint Server - Manual (Page 78)

Chapter 8. Management Tools
WPCONFIG
FastPrint Server User’s Guide 68
8.3.3. Icons
The icons provide status information as well as access to the selected FastPrint settings.
If an icon is grayed out, that option is unavailable.
Device information Device information
This presents configuration information about the FastPrint in a
scrollable, read-only list.
Printer port status Printer port status
Shows current printer status (on-line, printing, off-line) for all ports.
NetWare NetWare
Configure NetWare with this icon. See NetWare-specific settings on
page 19 for details.
TCP/IP TCP/IP
Initial configuration for TCP/IP must be done with FPSAdmin; later
changes can be made here. See IP address configuration on page 23 for
details.
AppleTalk AppleTalk
See AppleTalk Settings on page 8 for details of these configuration
settings.
NetBEUI
NetBEUI
NetBEUI (Windows SMB) changes can be made using this icon.
Normally, there is no need to make any changes. See NetBEUI Settings
on page 59 for details.
Logical Printers Logical Printers
Logical printers can be used under NetWare (see page 21) or Unix (see
page 24).
Refresh Refresh
Update the FastPrint listing. You must always do this after changing the
FastPrint Server name or IP address.
Exit Exit
Exit WPCONFIG.
Help Help
Show WPCONFIG version information.
Set to Default button Set to Default button
This button will restore current screen values to their factory defaults.
Save to Device button Save to Device button
Press this button to save any changes to the FastPrint Server.
Note: Changed values will not be saved until you click this button!