Appendix c. configuration file format – Allied Telesis FastPrint Server User Manual
Page 93
Appendix C.
Configuration File Format
FastPrint Server User’s Guide
83
Appendix C.
Configuration File Format
The following table shows the CONFIG file details. It contains the following
information:
♦
Default line
The line as obtained from the FastPrint Server. Each line has the following
structure:
Line_number Token:Parameter
where:
Line_number is a system parameter and must not be changed.
Token is a readable identifier for the line.
Parameter is the current setting. A colon separates the Token from the
Parameter.
♦
Allowable values
This column lists the values that may be used for the Parameter. The following
items are used:
Text[n], where n is a number, indicates a text field with a maximum length of n
characters.
Numeric[0..n], where n is a number, indicates the acceptable range of values for
a numeric field.
Access Code, where the allowable values are: Read Only, Read/Write, Not
Accessible.
♦
Description
Explains the purpose of the parameter.
Default Line
Default Line
Allowable
Allowable
Values
Values
Description
Description
0001 BOX_NAME:SCxxxxxx Text [19]
FastPrint Server name
0011 IPXSPX_P:Enable
Enable, Disable
NetWare protocol
0012 TCPIP_P :Enable
Enable, Disable
TCP/IP protocol
0013 APTALK_P:Enable
Enable, Disable
AppleTalk protocol
0014 NETB_P:Enable
Enable, Disable
NetBEUI protocol
0100 L1_PROUT:P1
P1, P2, P3
Port used by logical printer 1
0101 L1_PREST:
Text [15] (hex)
Pre-string LP 1
0102 L1_POSTR:
Text [15] (hex)
Post-string LP 1
0103 L1_CHGLF:No
Yes, No
Convert LF to LF/CR
0120 L2_PROUT:P1
P1, P2, P3
Port used by logical printer 2
0121 L2_PREST:
Text [15] (hex)
Pre-string LP 2
0122 L2_POSTR:
Text [15] (hex)
Post-string LP 2