Allied Telesis AT-S39 - Manual (Page 18)

Chapter 2: Basic Command Line Commands
18
SET PROMPT
Syntax
set prompt=prompt
Parameter
Prompt Specifies the command line prompt. The prompt can
be from one to seven alphanumeric characters. Spaces
and special characters are allowed. The default
command prompt is a dollar sign ($).
Description
This command changes the command prompt. Assigning each switch a
different command prompt can make it easier for you to determine
which switch you are managing when you are managing multiple
switches in an enhanced stack.
Example
The following command changes the command prompt to “Switch7”.
set prompt=Switch7