Allied Telesis AT-S39 - Manual (Page 192)

Chapter 21: Command Reference
192
SET PORTACCESS
set portaccess port=port|all
[role=none|authenticator]
[control=auto|forceauthenticate|forceunauthenticate]
[quietperiod=integer]
[txperiod=integer]
[reauthperiod=integer]
[supptimeout=integer]
[servtimeout=integer]
[maxreq=integer]
This command allows you to set port access control parameters.
Statistics Commands
SHOW SWITCH COUNTER
show switch counter
Displays a switch’s operating statistics, such as the number of packets
received and transmitted, and the number of CRC errors.
SHOW SWITCH PORT COUNTER
show switch port=port counter
Displays the operating statistics for a port on the switch.
RESET SWITCH COUNTER
reset switch counter
Returns all statistics counters on the switch to zero (0).
RESET SWITCH PORT COUNTER
reset switch port=port|all counter
Returns the statistics counter for a port to zero.
Download and Upload Commands
LOAD
load method=xmodem|remoteswitch
type=image|config|bootloader
switchnumber=switches