Swiftech APOGEE1 U User Manual
Page 5
Copyright Swiftech 2006 – All rights reserved – Last revision date: 5-16-06 – One or more Patents Pending
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail:
[email protected] – URL:
http://www.swiftnets.com
- Information subject to change without notice
AMD® 64, Sempron®, Opteron®
Socket 754, 939, 940
Removal of the motherboard is normally not necessary to install the Swiftech Water-block. Simply remove your
existing heatsink solution, the stock plastic frame surrounding the CPU, and install the water-block with the provided
hardware. Use of the included back-plate is not mandatory as back-plates are normally included with the
motherboard. See important note in reference to back-plate (item 4).
ITEM NO.
PART NUMBER
DESCRIPTIO
N
QTY
.
1
90272A153-6-32x1.00-philips
6-32 x 1.00" Philips screw
2
2
washer-0148x0266x0040-9100
7A619
Lock Washer #6 x 0.040
2
3
13RS040637
Nylon spacer for Apogee K8 assy
2
4
AJ00264
Back plate
1
1
3
4
Apogee-1U
Water-block
Motherboard
2
Note: the provided back-plate (Ajigo part #AJ00264) was designed in strict compliance with AMD specifications.
However, motherboard manufacturers may use different back-plate designs to suit their particular needs. Please