V. add-on components – Swiftech H20 120 PREMIUM User Manual
Page 26
Copyright Swiftech 2005 – All rights reserved – Last revision date: 09-22-06 - Information subject to change without notice – URL:
http://www.swiftnets.com
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail: [email protected]
PAGE 26 of 26
V. Add-on components
Improve performance with a second radiator:
MCR120-FK Radiator assembly
Part # MCR120-FK, includes radiator, 120mm fan
and mounting screws
Cool your graphics card with the MCW55 VGA water-block.
Go to:
http://www.swiftnets.com/products/mcw55.asp
for
specifications
Part # MCW55
Add a second
Apogee
water block for multiprocessor
applications, such as dual AMD®, dual Xeon™, or dual
Opteron™
For Dual Xeon “Nocona” users do not forget to add the
optional Nocona hardware (part AP-NC604) when you
purchase your second Apogee water-block. In effect, while this
hardware is included in this kit, it is not included when the
Apogee water-block is sold separately.
Cool the chipset with the
MCW30
chipset cooler
When heat loads are not “out of control” air-cooling does the job just fine.
Check out the heavy-duty air-cooled solutions below for your chipset and graphics memory.
Cool your chipset with the MCX159-CU whisper-quiet
heatsink.
Go to
http://www.swiftnets.com/products/mcx159-CU.asp
for
specifications
Part # MCX159-CU
Cool you graphics memory chips with the MC14 BGA heatsinks
Go to:
http://www.swiftnets.com/products/MC14.asp
Part # MC14
TV500 Drain assembly
1/2" (Tube OD) Flush Assembly, including 1/2" Tube quick-
connect T, and 1/2" quick-connect ball valve. A useful
accessory for users who empty their system often. Can also be
used as a fill T (without reservoir).