Antari Lighting and Effects IP-1500 - Manual (Page 5)

5
5. Hanging bracket with screws
6. User Manual
Assembly
1. Open the carton and carefully remove all packing materials.
2. Place the fog machine on a flat surface and make sure that no foreign objects, water or
dust can enter the air vents at the bottom of the machine.
3. Unscrew the fluid inlet, connect the screw with the PU pipe and insert the PU pipe,
then screw back the nut. Make sure they are connected securely.
Setup
TIMER VOLUME
1. Plug the power cord into a grounded electrical outlet. This machine is particularly
designed for outdoor applications. Please pay special attention to the waterproof
feature of the socket.
2. Insert one end of the liquid pipe with filter into a liquid tank, which is to be placed on a
flat surface.
3. The design of this machine does not include an additional power switch. When
connecting the machine to a power outlet it is powered on. The display will indicate
“Antari IP-1500” followed by “Wireless Setup”. During the next 15 seconds, the
machine is in wireless setup mode for registering wireless controllers. It is possible to
register up to 5 controllers with the machine during this period. It is also possible to use
1 2
Antari
IP-1500