Antari Lighting and Effects IP-1500 - Manual (Page 9)

9
W-1 Wireless Controller
With the wireless controller, it is possible to emit fog via radio over a distance of up to 50
meters.
Press button A, to emit fog. The button A has the same function as the button
VOLUME on the control panel, i.e. the fog output depends on the setting of menu item
“Volume Output“. The display indicates “Volume“ followed by the defined value. As
additional control, the LED lights.
To stop the fog output, press button B.
DMX512 Settings
The IP-1500 is equipped with a DMX512 system. For connecting a DMX controller, 5-pin
male-female XLR connections are provided at the back of the machine. The machine uses
one control channel for adjusting the output volume. The channel has a DMX value range
of 0 to 255. After connecting a DMX controller, timer functions such as output duration and
interval can be programmed using the DMX controller or the DMX control software. In DMX
mode, the machine cannot be controlled via the built-in control panel nor the W-1 wireless
controller anymore. By using the DMX protocol, fog machines, lighting effects, and other
special effects machines can be interconnected and easily controlled.
DMX VALUE FUNCTION
0~5 off (no output)
6~249 output volume control (5~95%)
250~255 maximum output volume (100%)