Spektrum DX6 - Manual (Page 15)

15 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN
 
F-Mode Setup
Use the Flight Mode Setup menu to assign switches to
flight modes.
Sailplane Flight Mode Setup
You can assign up to five flight modes using any combination of
up to two switches. You can also assign a priority switch. When
the priority switch position is active, only the current flight mode
is active, regardless of other switch positions.
Sailplane Flight Mode Table
You can assign the available flight modes (up to 5 for Sail) to each
of the switch positions (up to 2 switches can be used for sailplane).
Press NEXT from the Flight Mode Name page to access the flight
mode table assignment page when Custom flight mode has been
selected in the Flight Mode Setup page. The combination of up to 2
switches can be used to access all of the flight modes available.
Mode Number of Switches
Number of Flight
Modes
Aircraft 1 up to 3
Heli 2 (including Throttle Hold) 4 (including Throttle Hold)
Number
of Flight
Modes
2 3 3* 4 4 5
Switch 1
(number of
positions)
2P 3P 2P 2P 3P 3P
Switch 2
(number of
positions)
2P 3P 2P 3P
Flight
Mode
1
Launch Launch Launch Launch Launch Launch
2 Cruise Cruise Cruise Cruise Cruise Cruise
3 Land Land Land
4 Thermal Thermal Thermal Thermal
5 Speed Speed
*Must be set up in a 4/5 flight mode .
SYSTEM SETUP
  Model Name
Model Name enables you to assign a custom name to the current
model memory. Model names can include up to 20 characters,
including spaces.
To add letters to a Model Name:
1. Scroll to the desired letter position and press the scroll wheel
once. A flashing box appears.
2. Scroll left or right until the desired character appears. Press
the scroll wheel once to save the character.
3. Scroll to the next desired letter position. Repeat Steps 1 and 2
until the Model Name is complete.
4. Select BACK to return to the System Setup list.
To erase a character:
1. Press CLEAR while the character is selected.
2. Press CLEAR a second time to erase all characters to the right
of the cursor.
Aircraft Type 
This menu only available in Airplane Mode. See ACRO (Airplane) section for set up.
Sailplane Type 
This menu only available in Sailplane Mode. See SAIL (Sailplane) section for set up.
Swash Type
 This menu only available in Helicopter Mode. See HELI (Helicopter) section for set up.