Installing the ar9000, Installing the receiver – Spektrum SPMMSJR9 User Manual

Page 13

Advertising
background image

Spektrum Air Module

1

In helicopters, there is generally enough room on the servo tray to achieve the

necessary separation. If necessary, a mount can be made using clear plastic to

mount the remote antenna as shown below.

Installing the AR9000
The AR9000 incorporates dual internal receivers, and one or two remote receivers

offering the security of up to four simultaneous RF links for the ultimate in multi-

path RF security. Two internal receivers are located on the main PC board, while

a third remote receiver must be plugged into one of the antenna ports in order for

the system to operate. Optionally, a second remote antenna can be plugged into

the remaining remote antenna port giving a total of four operational receivers. By

locating these receivers in different locations throughout the aircraft, each receiver

is exposed to its own RF environment, greatly improving path diversity (the ability

of the receiver to see the signal in all conditions).

Installing the Receiver

Advertising
This manual is related to the following products: