Equipment rack guidelines – Asante Technologies FM2008/2009 User Manual
Page 14
FriendlyNET FM2008/2009
14
User’s Manual
Important! Make sure the unit is supported until all of the mounting screws
for each bracket are secured to the equipment rack. Failure to do so could
cause the unit to fall, which may result in personal injury or damage to the
unit.
Equipment Rack Guidelines
•
Size: 10.0 x 5.2 x 1.5 inches
•
Ventilation: Ensure that the rack is installed in a room in which the
temperature remains below 40° C (104° F). Be sure that no
obstructions, such as other equipment or cables, block airflow to or
from the vents
•
Clearance: In addition to providing clearance for ventilation, ensure
that adequate clearance for servicing the switch from the front exists
Power On
Connect the power cord to the power socket on the rear panel of the
switch. The other side of power cord connects to the power outlet. The
internal power supply in the switch works with AC in the voltage
ranges 100-240VAC, frequency 50–60Hz.
Check the power indicator on the front panel to see if power is
properly supplied.