Asante Technologies FM2008/2009 - Manual (Page 63)

FriendlyNET FM2008/2009 63 User’s Manual
GVRP (GARP [Generic Attribute Registration Protocol] VLAN
Registration Protocol)
GVRP allows automatic VLAN configuration between the switch and
nodes. If the switch is connected to a device with GVRP enabled, you
can send a GVRP request using the VID of a VLAN defined on the
switch; the switch will automatically add that device to the existing
VLAN.
4.4.3 Console Port Information
The console is a standard UART interface used to communicate with
the serial port. You may use Windows HyperTerminal or a similar
program to link to the switch. From this page, you may view or
configure the desired parameters for your console connection:
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none