Spektrum SPMVS1100 - Manual (Page 8)

EN
8
• By handling, charging or using the included
Li-Po battery, you assume all risks associated
with lithium batteries.
• If at any time the battery begins to balloon
or swell, discontinue use immediately. If
charging or discharging, discontinue and
disconnect. Continuing to use, charge or
discharge a battery that is ballooning or
swelling can result in fire.
• Always store the battery at room
temperature in a dry area for best results.
• Always transport or temporarily store the
battery in a temperature range of 40–120º F
(5–49° C). Do not store the battery or model
in a car or direct sunlight. If stored in a hot
car, the battery can be damaged or even
catch fire.
• Always charge batteries away from
flammable materials.
• Always inspect the battery before charging.
• Always disconnect the battery after
charging, and let the charger cool between
charges.
• Always constantly monitor the temperature
of the battery pack while charging.
• ONLY USE A CHARGER SPECIFICALLY
DESIGNED TO CHARGE LI-PO BATTERIES.
Failure to charge the battery with a
compatible charger may cause a fire
resulting in personal injury and/or property
damage.
• Never discharge Li-Po cells to below 3V
under load.
• Never cover warning labels with hook and
loop strips.
• Never leave charging batteries unattended.
• Never charge batteries outside
recommended levels.
• Never charge damaged batteries.
• Never attempt to dismantle or alter the
charger.
• Never allow minors to charge battery
packs.
• Never charge batteries in extremely hot
or cold places (recommended between
40–120° F (5–49° C)) or place in direct
sunlight.
Charger Warnings
Charging the Headset Battery Pack With Included Charger
1. Connect the charger to the wall outlet. The charger LED will be solid green.
2. Connect the battery to the charger. The charger LED will be solid red.
3. The charger LED is solid green when charging is complete.
4. Disconnect the battery from the charger and unplug the charger from the wall outlet.
CAUTION: If at any time during the charge process the battery pack
becomes hot to the touch, unplug the battery immediately and discontinue
the charge process.
Charging the Headset Battery Pack With Optional Chargers
1. Connect the Li-Po battery pack balance lead to your battery charger. If your battery
charger requires you to connect the battery power for charging, use the included
battery charge adapter.
2. Follow your battery charger instructions for charging a 7.4V 760mAh Li-Po battery.
The battery charger included with your product has been designed to safely charge the
Li-Po battery.
CAUTION: All instructions and warnings must be followed exactly. Mishandling
of Li-Po batteries can result in a fire, personal injury and/or property damage.