Ap repeater – Airlink AP431W User Manual
Page 11
Advertising
AP Repeater
The AP Repeater mode converts the Access Point to a wireless repeater. By extending the wireless
signal of the source AP/wireless router, the wireless coverage is expanded.
Step 1
Select AP Repeater and enter the MAC address or use the Scan button to search for the remote
AP (source AP/wireless router). Click Apply to save the changes
Step 2
Once the Repeater has restarted, you may disconnect it from the wireless router. For best result,
place the Repeater at a central location between the wireless router and your wireless computers.
Note:
The repeater mode may not be compatible with all routers due to the lack of a standard protocol
for repeater mode.
Advertising