Jp en de fr es se ru nl it ck ch kr, The built-in flash and vignetting, Using the lens hood – Nikon 70-200mm-f-28G-ED-AF-S-VR-II-Zoom-Nikko User Manual
Page 21
21
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
The built-in flash and vignetting
To prevent vignetting, do not use the lens hood.
Cameras
Supported focal length/Shooting distance
F70-Series/N70*
• 85 mm/2 m (6.6 ft.) or greater
• 105 mm or longer/No restriction
F60-Series/N60*
• 105 mm/2.5 m (8.2 ft.) or greater
• 135 mm or longer/No restriction
F50-Series/N50*
• 135 mm/2.5 m (8.2 ft.) or greater
• 200 mm/No restriction
F65-Series/N65-Series*,
F55-Series/N55-Series*
• 105 mm/3 m (9.8 ft.) or greater
• 135 mm or longer/No restriction
F75-Series/N75-Series*,
Pronea 600i/6i*
• 85 mm/2.5 m (8.2 ft.) or greater
• 105 mm or longer/No restriction
Pronea S
• 200 mm/2 m (6.6 ft.) or greater
*Sold exclusively in the U.S.A.
Using the lens hood
Lens hoods minimise stray light and protect the lens.
Attaching the hood
•
Be sure that the lens hood mounting index ( ) is aligned
with the lens hood setting index (
) (3).
•
To facilitate attachment or removal of the hood, hold
it by the base (near the lens hood attachment index
(
)) rather than its outer edge.
•
If the lens hood is not correctly attached, vignetting
may occur.
•
To store the lens hood, attach it in the reverse
position.
Detaching the hood
While holding down the lens hood lock release button
(1), turn the hood clockwise (as viewed from the
camera side) (2, 3).