Nikon 2500 User Manual
Page 114
102
Technical Notes
Display
Solution
Problem
COMMUNICATIONS
ERROR
TRANSFER
ERROR
44,
19
Check that the camera is
properly connected and
battery fully charged.
Error occurred when
pictures were trans-
ferred to computer.
FILE CONTAINS
NO IMAGE DATA
86,
72
Delete file or reformat
memory card.
File created by com-
puter or different
make of camera.
NO IMAGES ARE
MARKED FOR
TRANSFER
33,
44,
79,
91
Disconnect camera and
mark at least one picture
for transfer before con-
necting camera again.
No pictures marked
for transfer when
(
) button
pressed to copy pic-
tures to computer.
SYSTEM ERROR
16
Turn camera off, unplug
optional AC adapter kit (if
using) or remove and re-in-
sert battery, and turn cam-
era on. If error persists,
contact retailer or Nikon
representative.
Error has occurred in
camera’s internal cir-
cuitry.
16,
44,
47
If error appears in comput-
er monitor, click OK to exit
Nikon View 5. Turn cam-
era off, reconnect cable or
replace memory card, then
turn camera on.
USB cable discon-
nected or memory
card removed while
pictures are being
transferred to com-
puter.
74
Turn camera off and dis-
connect USB cable, then
change USB selection in
camera setup menu and
reconnect camera. If error
reoccurs, use Nikon View
5
button to transfer
pictures.
Protocol selected in
USB menu does not
match that used by
computer operating
system, causing error
when
(
) but-
ton is pressed to
transfer pictures.