Nikon 2500 - Manual (Page 59)

47
Connections
Disconnecting the Camera
Before turning the camera off or disconnecting the interface cable, be sure
that transfer is complete and that the camera displays the message “TRANS-
FER COMPLETED.” While transfer is in progress, do not disconnect the USB
cable, turn the camera off, or remove the memory card from the camera.
Use a Reliable Power Source
When transferring data between the camera and the computer, be sure that
the battery is fully charged. If in doubt, recharge the battery before begin-
ning transfer or use the optional EH-60 AC adapter kit.
Windows 2000 Professional
Click the “Unplug or Eject Hardware” icon (
)
in the taskbar and select Stop USB Mass Stor-
age Device from the menu that appears.
Windows Millennium Edition (Me)
Click the “Unplug or Eject Hardware” icon (
)
in the taskbar and select Stop USB Disk from
the menu that appears.
Windows 98 Second Edition (SE)
In My Computer, click with the right mouse but-
ton on the removable disk corresponding to the
camera and select Eject from the menu that
appears.
Mac OS X
Drag the “NO_NAME” camera volume into the
Trash.
Mac OS 9
Drag the “untitled” camera volume into the
Trash.
Once you have removed the camera from the system, you can disconnect
the interface cable or turn the camera off.
Mac OS X Mac OS 9