Step 3 — focus and shoot – Nikon S2 User Manual

Page 26

Advertising
background image

16

Basic Photography

Step 3 — Focus and Shoot

1

Focus

Press the

shutter-release button halfway to set

focus and exposure. In

mode, the camera will

automatically focus on the subject at the center of
the frame. Focus and exposure will lock while the
shutter-release button is pressed halfway.

With the shutter-release button pressed halfway,
check the focus and fl ash indicators:

Focus

indicator

On

(green)

Subject in focus.

Blinks

red

Camera unable to focus on subject at
center of frame. Using focus lock, focus
on another subject at same distance, then
recompose picture and shoot (

92).

Indicator lamp

(fl

ash lamp)

On

(red)

Flash will fi re when picture is taken.

Blinks

red

Flash is charging.

Off

Flash is off or not required.

2

Take the picture

Press the shutter release button the rest of the way
down
to take the picture. To prevent blur, press the
shutter-release button down smoothly (a blur warn-
ing may appear at slow shutter speeds;

78).

Focus indicator

Indicator lamp

(fl ash lamp)

During Recording

While pictures are being recorded, the internal memory / memory card indicator (

or

) will blink. The camera can continue to take pictures until the (wait) icon is

displayed. Do not turn the camera off, eject the memory card, or remove or dis-
connect the power source while the internal memory / memory card indicator is
blinking or the icon is displayed
. Cutting power or removing the memory card in
these circumstances could result in loss of data or in damage to the camera or card.

The AF-Assist Illuminator

If lighting is poor, the built-in AF-assist illuminator will light
when the shutter-release button is pressed halfway, allowing
the camera to focus even when the subject is poorly lit (

80).

AUTO

10

Advertising