Nikon S2 - Manual (Page 57)

47
More on Playback
To choose a USB option, highlight Interface in the setup menu ( 80) and
press the multi selector to the right. The menu shown in Step 1 will be dis-
played.
1
INTERFACE INTERFACE INTERFACE
Exit Exit Exit Confirm Confirm Confirm
Video mode
Auto transfer
USB USB
Highlight USB.
2
USB USB USB
Exit Exit Exit Confirm Confirm Confirm
PTP
g Mass storage
Display USB menu.
3
USB USB USB
Exit Exit Exit Confirm Confirm Confirm
PTP
g Mass storage
Highlight PTP or Mass storage.
4
INTERFACE INTERFACE INTERFACE
Exit Exit Exit Confirm Confirm Confirm
Video mode
Auto transfer
USB USB
Select highlighted option.
Connecting the USB Cable
1 Place the camera in the COOL-STATION
Turn the camera off and place it in the COOL-STATION ( 8).
2 Connect the USB cable
If the computer is not already running, turn it on and wait for it to start
up. Connect the UC-E10 USB cable as shown below. Connect the COOL-
STATION directly to the computer; do not connect the cable via a USB hub
or keyboard.
3 Turn the camera on
Turn the camera on by opening the sliding lens cover.
UC-E10 USB cable