Nikon L820 - Manual (Page 154)

E 36
Re
fere
nce
S
ecti
on
Continuous Shooting
You can change settings to continuous or BSS (best shot selector).
Enter A (auto) mode M d button M Continuous M k button
Option Description
U Single
(default setting)
One picture is taken each time the shutter-release button is pressed.
k Continuous H
While the shutter-release button is held all the way down, images are
captured continuously at a rate of about 8 fps (when image mode is set to
P 4608×3456). Shooting ends when the shutter-release button is
released, or six images have been captured.
m Continuous L
While the shutter-release button is held all the way down, up to 38 images
are captured continuously at a rate of about 2.1 fps (when Image mode is
set to P 4608×3456). Shooting ends when the shutter-release button is
released.
n Continuous H:
120 fps
Each time the shutter-release button is pressed all the way, 50 frames are
captured at a speed of about 1/120 s or faster.
Image mode is fixed at O (image size: 640 × 480 pixels).
j Continuous H:
60 fps
Each time the shutter-release button is pressed all the way, 25 frames are
captured at a speed of about 1/60 s or faster.
Image mode is fixed at M (image size: 1280 × 960 pixels).
D BSS
(best shot selector)
The “best shot selector” is recommended when shooting with the flash off
or the camera zoomed in, or in other situations in which inadvertent
motion can result in blurred images. When BSS is on, the camera captures
up to 10 images while the shutter-release button is held down. The
sharpest image in the series is automatically selected and saved.
• BSS is best suited to shooting subjects that are not moving. When
shooting moving subjects or when the composition of the picture
changes while shooting, the desired results may not be achieved.