Nikon L820 - Manual (Page 155)

E 37
Re
fere
nce
S
ecti
on
The icon for the current setting is displayed in the monitor when the camera is in shooting
mode (
A 8). No icon is displayed when Single is selected.
W Multi-shot 16
Each time the shutter-release button is pressed all
the way down, the camera takes 16 shots at a rate
of about 30 fps and arranges them in a single
image.
• Images are captured with the Image mode
fixed at L (image size is 2560 × 1920 pixels).
• Digital zoom cannot be used.
Option Description
B
Notes About Continuous Shooting
• When a setting other than Single is selected, flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the images depends on the number of images, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Continuous is set to Continuous H: 120 fps, Continuous H: 60 fps, or Multi-shot 16,
banding or variance in brightness or hue may occur in images that were captured under lighting
that flickers at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.
• When ISO sensitivity is 1600 or 3200, the rate at which images are captured continuously may
decrease.
• Some settings cannot be used with other functions (A 66).
C
Images Captured Using Continuous Shooting
Each series of images captured is saved as a “sequence” ( E6).