Connecting the camera to a printer, A 162) – Nikon S9050 User Manual
Page 174
162
Connecting to a Printer
Con
n
ec
ti
ng t
o
Te
le
vi
sion
s, C
o
mputers and
Pri
n
ters
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
When properly connected, the PictBridge startup screen
(
1) will be displayed in the camera monitor, followed by
the Print selection screen (
2).
Print selection
3 2
N O . 3 2
1 5 / 1 1
2 0 1 2
1
2
B
If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (
in the camera’s setup menu to Off and reconnect the cable.