Nikon S9050 - Manual (Page 92)

80
More on
Sh
ooting
Burst Shooting (Continuous Shooting Mode)
Use this mode to capture the details of a moving subject by shooting a continuous
series of images.
• The focus, exposure, and white balance settings are fixed at the values for the
first picture in each series.
1
Rotate the mode dial to
C (continuous).
The camera enters continuous
shooting mode.
2
Press the d button and confirm or change
the settings in the continuous menu.
See “Continuous Menu” ( A 82) for more information.
Press the d button after changing the settings and
return to the shooting screen.
3
Frame the subject and shoot.
By default, if the camera detects a human face, it focuses on
that face (see “Face Detection” (
A 56) for more
information). If the camera does not detect any faces, the
camera selects the focus areas (up to nine areas) containing
the subject closest to the camera.
Press the shutter-release button halfway to lock focus and
exposure.
When Continuous H, Continuous L, Pre-shooting cache, or BSS is selected in the
continuous menu, images are captured while the shutter-release button is held all the
way down.
When Continuous H: 120 fps, Continuous H: 60 fps, or Multi-shot 16 is selected in
the continuous menu, the number of images determined by the setting are captured
when the shutter-release button is pressed all the way. There is no need to hold the
shutter-release button down.
After taking a picture, the camera returns to the shooting screen. If O is displayed, do not
turn the camera off.
2 5 2 5
Autofocus mode
AF area mode
ISO sensitivity
Metering
White balance
Image mode
Continuous
Continuous
2 5 2 5